Username: Password:

Author Topic: [WIP]Akizuki Ryo 'Fraulein' Revoltech  (Read 3286 times)

OverlordIX

  • Senior member
  • ****
  • Posts: 407
  • TermiRaisha - Systems Online.
    • View Profile
    • Silent Stronghold
Re: [WIP]Punkish Gothic Haruka Fraulein Revoltech
« Reply #15 on: September 07, 2009, 06:08:29 pm »
Wow, that must have taken awhile to do. =)

When 5 Muppets come together, you get one heck of a gaming team!

BT2

  • Producer
  • *****
  • Posts: 670
  • ξ*'ω')ξ にょわー☆
    • View Profile
Re: [WIP]Punkish Gothic Haruka Fraulein Revoltech
« Reply #16 on: October 09, 2009, 10:59:41 pm »
Finally decided to actually finish this thing so I can start on a new project.
In case people're asking: No, it doesn't take 2 months to make a stupid tie and add a couble of tubes, I'm just lazy.



airgeneralpong

  • Senior member
  • ****
  • Posts: 261
    • View Profile
Re: [WIP]Punkish Gothic Haruka Fraulein Revoltech
« Reply #17 on: October 10, 2009, 05:00:54 pm »
Very Nice!!! :D
I wish I could do some modification like this to my Futami!!! (and also my Haruka!) XDDD

BT2

  • Producer
  • *****
  • Posts: 670
  • ξ*'ω')ξ にょわー☆
    • View Profile
Re: [WIP]Akizuki Ryo Fraulein Revoltech
« Reply #18 on: November 22, 2009, 11:50:18 pm »
A WIP I've been working on for a couple of weeks in my spare time now.

Akizuki Ryo 'Fraulein' Revoltech

I decided to start out by mutilating a regular FR Haruka body, because it somewhat resembled Ryo's C&G costume, and forcefully removed the back part of her costume, the ribbon on her chest and those small ribbons.
I intend to reuse those small ribbons later on by sticking it on the skirt piece.

Then I scraped off some parts with a knife and filled some gaps with some putty.
Because the 2 parts of Haruka's skirt is kept together by the big part I removed, I used some putty to make a standalone skirt from the 2 halves.


Some very rough sculpting here.




For some reason I decided to paint all parts white so I could grasp the parts I needed to sand better, thinking back at it now it wasn't such a smart move and a waste of paint...


...same story for this pointless pink paint job, good thing though is that I mixed a pink that somewhat resembles the colors used on FR iM@S figures, needs to be a bit lighter but a few drops of white paint should fix that, and that every custom part feels somewhat smooth now.
Also decided to redo the neck part.


Also, because I still had a couple of random Nendoroids lying around, I tried making Ryo's hair from puppet clay.
Don't ask why I have that, puppet clay isn't even that good and it's not exactly cheap either.
Still, it's cheaper than epoxy putty, so meh..
I intend to use this Nendoroid head as a reference, so it doesn't matter too much that it isn't exactly like how it looks like ingame and on artwork.



[Edit]
Fix'd broken tag
« Last Edit: November 22, 2009, 11:57:16 pm by BT2 »

TweenDoriru

  • Producer
  • *****
  • Posts: 1356
  • inactive like crazy
    • View Profile
    • sometimes drawing stuff
Re: [WIP]Akizuki Ryo 'Fraulein' Revoltech
« Reply #19 on: November 23, 2009, 02:08:59 am »
A WIP I've been working on for a couple of weeks in my spare time now.

Akizuki Ryo 'Fraulein' Revoltech
looks pretty good so far!  can't wait to see this finished. :D